Micronized powder plant ring roller mill
Production introduction
Our new-type ring roller mill series is a new kind of grinder depending on its technology R&D capability and referring to similar products' advantages home and abroad. It has comprehensive mechanical crushing properties such as rolling,grinding and impacting. According to clients' different requirements to finished powder, our company can provide diverse and customized solutions to help clients produce customized powder products. This series has such features as large output,lower energy-consumption,long operating life and easy maintenance. It is a perfect option for customers who prefer high return from investment.
Production line design.
1.material bin 2.feeder 3.main crushing unit 4.deduster 5. air blower
Technical advantages
a.high reliability
b. low energy -consumption
c.internal system optimization and higher efficiency
d. intelligentize system
e.improvements in enviromental protection
Micronized powder plant ring roller mill application:
Suitable for processing of nonmetallic minerals such as calcium carbonate,clay,barite,talc,gypsum,limestone,calcium oxide,bentonite,dolomite etc.
Detail technical specification.
model
parameter |
LYHM-780 |
LYHM-930X |
LYMH-930 |
LYHM1100 |
LYHM1100C |
| Feeding size(mm) |
≤10 |
| Feeding material moisture(%) |
≤3% |
| Powder fineness(mesh) |
325-3000 |
1500-3500 |
325-2500 |
325-2500 |
100-1250 |
| Output(t/h) |
0.5-4 |
0.8-2 |
0.8-6.5 |
1.8-11 |
4-12 |
| Power consumption(kw.h/t) |
50-170 |
100-190 |
35-160 |
35-160 |
32-75 |
| Installed capacity(kw) |
143-148 |
221-243 |
221-243 |
368-416 |
368-416 |
| Compressed air(m3/min) |
1.5 |
2 |
3 |
| L*W*H(mm) |
12000X3100X5900 |
14000X3800X6200 |
15800X5800X7300 |
Main composition.
Part 1: Main unit (Grinding system)
Raw material is fed into grinding chamber via feed port of upper part, then be grinded between rollers and grinding rings in to powders. powders are blowed into upper part. Qualified particle goes into powder collecting system through classifier wheel, others fall and be grinded again.
Part 2: Deduster (Powder collecting system)
In reverse-pulse-jet baghouses, individual bags are supported by a metal cage, Dusty air enters from the bottom of the baghouse and flows from outside to inside the bags. Bags are cleaned by a short burst of compressed air injection. The powder falls into a storage hopper below. This collecting system works with the help of digital sequential timer (PLC) attached to the pulse valves.
Part 3: Electric control or PLC system
Adapting domestic top level electric components/or Siemense/Or schneider, after 20 years' testing. Our electric control or PLC system is very easy to operate, fully automatic operation, and one button stop, It's also easily adjust. Buyer only needs
to adjust current and frequency with visible digitals to reach different particle size from 325-3000 mesh.
Packing and delivery.
Audited Supplier 
){kind=link}