Gypsum Mills

• Customization: Available
• Type: Roller Mill
• Motor Type: AC Motor
• Model NO.: 780-1100
• Motor Power: 132 Kw
• Rotationl Speed: 500-3000
• Application: Mine
• Materials: Limesont/Calcite/Dolomite/Barite/Kaolin
• Condition: New
• Warranty: 6 Months
• After-sales Service: 6 Months
• Transport Package: Sea Worthy Standard Packing
• Specification: Customized
• Trademark: HT
• Origin: China
• HS Code: 84742010
• Production Capacity: 100 Sets/Month

Product Description

I.Application

Gypsums mills are suitable for processing of nonmetallic minerals such as calcium carbonate,clay,barite,talc,gypsum,limestone,calcium

oxide,bentonite,dolomite etc.

 

II.Product introduction:

Gypsum mill is a super-fine crushing equipment developed by our factory for many years of production and R&D experience. It has comprehensive mechanical crushing properties such as rolling, grinding and impact, and it is widely used in talc,superfine pulverization of various non-metallic minerals such as calcite, calcium carbonate, dolomite, potassium feldspar, bentonite, kaolin, graphite, carbon, etc., with Mohs hardness below 7 and humidity of 6%, it is truly energy-saving, especially ultra-fine pulverizing equipment suitable for deep processing of non-metallic minerals.

 

III. Product advantages

1. The mill has small footprint, strong set, wide application, simple operation, convenient maintenance, stable performance and high cost performance. It is an energy-saving fine powder processing equipment.

2. It has the advantages of high fineness, high output, low energy consumption and low investment. The crushing capacity of the gypsum mill is more than double that of similar equipment.

3. The equipment system is perfect, it can achieve the two processes of ultra-fine pulverization and super-segmentation at the same time.

1.  The fineness of the finished product is arbitrarily adjusted between 0.04-0.005mm (400-2500 mesh), and the products with different fineness produced are better adapted to the market demand and improve the competitiveness of the enterprise.
2. Environmentally friendly production: equipment operation noise is small, dust removal efficiency is high, no dust pollution.
3. The equipment is easy to install. It does not require large-scale civil works. After the equipment is installed, it can be put into production immediately.
4. The equipment runs smoothly and has reliable performance. It can be continuously produced normally, with high precision of product fineness classification and good product quality.
5. Low wear: the wear parts are made of special wear-resistant materials, which prolong the service life.

 

IV.Working principle

The material is crushed into less than 10 (mm) material by a jaw crusher or hammer crusher, and is lifted to the storage hopper by the bucket elevator, and then quantitatively fed into the main chamber by the electromagnetic vibrating feeder for grinding, and the grinding machine is installed on the rotary table in the main cavity. The roller rotates around the central axis, and there is a large active gap between the grinding roller and the grinding roller shaft. Under the action of the centrifugal force, the grinding roller swings horizontally outward, so that the grinding roller presses the grinding ring, and the grinding roller rotates around the grinding roller shaft at the same time. . The material passes through the gap between the grinding roller and the grinding ring, and the grinding roller is pulverized and ground by the rolling of the grinding roller. The grinding roller is divided into four layers, and the material passes through the first layer of the grinding roller and the grinding ring for one-time pulverization, and then passes through. The second, third and fourth layers are pulverized. Therefore, the material is sufficiently pulverized and ground, and the obtained product has fineness.

The ground powder falls on the bottom plate due to gravity, and is blown to the classifier above the main machine under the action of the airflow of the blower for screening. If the fineness is too thick, it will fall into the main machine and re-grinds until the fineness conforms to the specifications. The wind flows into the pulse dust collector, and it is collected as a finished product after being discharged through the discharge valve. The purified airflow flows into the blower through the residual air pipe above the pulse dust collector, and the air path is circulated, except for the positive pressure of the blower to the grinding chamber, and the remaining tubes The airflow in the road flows under negative pressure, and the indoor sanitary conditions are better. Since the moisture content of the material is evaporated to gas during the grinding, the gas leaked from the joints of the flanges, the feed port, etc. In the pipeline causes an increase in the amount of air in the circulating air passage, and the increased air volume is between the blower and the main engine. The bellows interface is vented to the atmosphere.

V. Detail technical specification.

model parameter	LYHM-780	LYHM-930X	LYMH-930	LYHM1100	LYHM1100C
Feeding size(mm)	≤10
Feeding material moisture(%)	≤3%
Powder fineness(mesh)	325-3000	1500-3500	325-2500	325-2500	100-1250
Output(t/h)	0.5-4	0.8-2	0.8-6.5	1.8-11	4-12
Power consumption(kw.h/t)	50-170	100-190	35-160	35-160	32-75
Installed capacity(kw)	143-148	221-243	221-243	368-416	368-416
Compressed air(m3/min)	1.5	2		3
L*W*H(mm)	12000X3100X5900	14000X3800X6200		15800X5800X7300